Cabinet Disassembly Instructions - Philips 40PFL4707/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[8] Speaker [2] Rear Cabinet
[9] Speaker
Holder(L,R)
[3] Digital Main [4] Power Supply
CBA Unit CBA
[6] Digital [7] Power
PCB Holder PCB Holder
[12] LCD Module
Assembly
[13] Front
Cabinet
2. Disassembly Method
Step/
Fig.
Loc. Part
No.
No.
Stand
[1] D1 4(S-1)
Assembly
Rear 12(S-2), 4(S-3), (S-4),
[2] D1
Cabinet (S-5), 10(L-1)
4(S-6), CN3013
CN3101
CN3601
Digital Main D2
[3] CN3906
CBA Unit D5
Wireless Lan
Adaptor
Jack Holder
Power
D2 6(S-7), CN401,
[4] Supply
D5 CN600, CL600
CBA
IR Sensor D3
[5] CN4051, Shield Plate
CBA D5
Digital PCB
[6] D3 4(S-8)
Holder
Power PCB
[7] D3 6(S-9), Wire Holder
Holder
[8] Speaker D3 ---------------
[11] Function
CBA
[5] IR Sensor
CBA
[10] Stand
Bracket
Removal Note
---
---
*1
,
*1 *1
, CN3701 ,
*2 *2
, CN3105 ,
*2
, ---
*2
, CN3801,
---
---
---
---
---
4-1
Step/
Fig.
Loc. Part
No.
No.
Speaker
[9] D3 2(S-10)
Holder(L,R)
Stand 4(S-11), (S-12),
[10] D3
Bracket CL600
Function D4 Knob Frame, Function
[11]
CBA D5 Button
LCD
8(S-13),
[12] Module D4
Panel Holder(L,R,T)
Assembly
Front
[13] D4 Corner Block
Cabinet
↓ ↓ ↓
(1) (2) (3)
*1: TYPE A
*2: TYPE B
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Removal Note
---
---
---
---
---
↓ ↓
(4) (5)
PL12.3_DC