Radio Control Transmitter Battery Installation; Radio Control Transmitter Functions - Odyssey TURBO RUNNER Manual

RADIO CONTROL TRANSMITTER • BATTERY INSTALLATION
Unscrew the screw holding the battery lid
to the body. Then lightly pull the clip to pull
the lid away from the transmitter body.
CAUTION
If the Radio Control Transmitter will not be used or stored for extended periods of time, please remove the batteries.
WARNING
Please check the AA batteries routinely. If the AA batteries are left within the Radio Control Transmitter, potential
leakage and/or corrosion may occur which can damage the transmitter and create a fire hazard.
NOTICE
Please use 4 AA batteries. Use the polarity markings to install in the correct orientation.
Do not mix different batteries or battery types.
RADIO CONTROL TRANSMITTER • FUNCTIONS
Speed Setting
Throttle Stick • Up/Down & Left Right
Automatic Mode
Trim Adjustment for Left/Right Turns
Power Switch
Fly/Run Mode:
Fly Mode - Press the button then you will hear a double beep.
Run Mode - Press the button then you will hear a single beep.
Fly/Run Mode
Insert 4xAA batteries into the battery compartment,
making sure to match the polarities. Then replace the
lid and firmly tighten the screw to secure the battery
compartment.
2.4 Ghz Antenna
Power Light
Speed Setting:
High Speed Mode - Press the button then you will hear a double beep.
Low Speed Mode - Press the button then you will hear a single beep.
360°Flip
Forward/Backward &
Left/Right Joystick
Trim Adjustment for Forward/Backward
Trim Adjustment for Side Motion