Troubleshooting; Product Specifications; Battery And Charger - Ryobi OCS1825 Original Instructions Manual

TROUBLESHOOTING

Problem Possible cause
Bar and chain Check chain tension
running hot and for over tight condition
smoking.
Chain oil tank empty.
Motor runs, but Chain tension too
chain is not tight.
rotating.
Check guide bar and
chain assembly.
Check guide bar and
chain for damage.

PRODUCT SPECIFICATIONS

Solution
Cordless Chainsaw
Tension chain.
Model
Refer to Chain
Tension section in
Rated voltage
this manual.
Bar length
Check oil tank.
Chain oil tank capacity
Retension chain,
Refer to Chain
Weight (without battery pack, with
Tension section in
guide bar, chain and empty tank)
this manual.
Refer to Usable cutting length
Assembling the
Chain speed
Bar and Chain
section in this
manual.

BATTERY AND CHARGER

Inspect guide
bar and chain for
Compatible charger
damage.
(not included)
Compatible battery
packs (not included)
REPLACEMENT PART (BAR AND CHAIN)
Manufacturer
Chain
Bar
Chain must be fi tted with bar from the same manufacturer
according to above combinations.
OCS1825
DC 18 Volts
25.4 cm
120 ml
2.6 kg
16.0 cm
3.6 m/s
BCL14181H, BCL14183H
BPL-1815, BPL-1820, RB18L13,
RB18L15, RB18L25, RB18L26, RB18L40,
RB18L50
Tri-link
CL14340XPB
M1431040- 1041HL