Removing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the battery.
2
Remove the
optical
3
Remove the keyboard.
Procedure
1
Close the display, and turn the computer over.
2
Remove the eight screws (M2.5x8) that secure the base cover to the palm-rest
assembly.
3
Remove the two screws (M2x5) that secure the base cover to the palm-rest
assembly.
computer. After working inside your computer, follow
After working inside your
drive.
computer. For more safety best
www.dell.com/
Before
25