Operation - pro user APB100 Manual

OPERATION

The mirror will automatically turn on when the vehicle is in reverse gear.
There are 5 control buttons available for users to have their controls:
Power button
Press the POWER button to supply power to the mirror. When the mirror image is on, the
blue LED(beneath the power button) will be off. If there is power to the mirror, but the
mirror image is OFF, the blue LED will on. When the monitor power is off, no picture can
appear on the screen and the blue LED will be off.
Menu button
Press the Menu button to enter the menu screen as shown below:
To exit the menu screen, select exit on the screen using the MENU button and press
either + or – to exit the menu screen.
Guideline button
The unit has the option to show distance-guidelines on
the display. This helps you to visually see the distance
between the objects behind your car. By pressing the
guideline button, you can switch this option on and off.
Repeat pressing the Menu button to select Brightness,
contrast or colour of the picture.
Press the + button or – button to adjust settings within
the control selected. Press the + button to increase the
value and press the – button to decrease the value.
9