Table of Contents
Advertisement
12.4 Scan
This screen is used to view the date and results of the last scan performed. It may
also be used to launch a new scan.
- Press the green colour key to scan the KDG network.
- Alternatively, press the yellow colour key to search for All channels.
12.5 Display
This screen is used to set your receiver according to your TV set screen format and
depending on the output selected (HDMI/DVI,YPbPr, or EXT1/2).
- Set values for the following (default settings are underlined):
HDMI/DVI
TV Screen Format
16: 9
Full Screen or Pillar Box, or Extended
Display format
See table in paragraph 13.5.1.
Resolution
Auto, 1080i, 720p, or 576p
TV SCART Output
Not applicable
AV Control
- Press EXIT to exit the screen.
12.6 Dolby Digital out of the digital audio
output
This screen is used to enable/disable Dolby Digital sound.
When Dolby Digital is disabled, you can still get stereo sound in digital format (PCM).
12.7 Wake up
This screen is used to set the channel to be tuned at the receiver wake-up. Default
setting is programme 100.
HDTV output
SDTV output
YPbPr
EXT1/2
4: 3 or 16: 9, depending
on your TV set
Auto or Letter Box, or
Centre Cut-Out
Not adjustable
(always 576i)
RGB (recommended) or
CVBS, or S-VIDEO
On (recommended) or
Off
EN
77
Advertisement
Table of Contents
