Replace The Batteries - Philips BDP9000 User Manual
Philips blu-ray disc player user manual bdp9000
Hide thumbs
Also See for BDP9000:
- Specifications (2 pages) ,
- Quick start manual (9 pages) ,
- Service manual (105 pages)
Table of Contents
Advertisement
EN
14
4 Press the 1.
> The mode light flashes two times and the factory default settings are restored.
Replace the batteries
WARNING DO NOT USE OLD AND NEW BATTERIES OR DIFFERENT TYPES
OF BATTERIES IN COMBINATION. IF YOU DO, THE BATTERIES CAN LEAK
CHEMICALS. THE CHEMICALS CAN CAUSE DAMAGE TO THE PRODUCT AND
CAUSE INJURIES.
•
When you replace the batteries, make sure you replace them within 5 minutes.
The memory of the universal remote control holds all programmed settings for 5
minutes. After 5 minutes, the programmed settings are replaced with the factory
default settings.
•
When you replace the batteries, make sure that you do not press any key or but-
ton. If you do, the programmed settings can be replaced with the factory default
settings.
•
To prevent battery leakage which may result in bodily injury, property damage, or
damage to the unit:
•
Install all batteries correctly, + and - as marked on the unit.
•
Do not mix batteries (old and new, or carbon and alkaline, etc.)
•
Remove batteries when the unit is not used for a long time.
1 Open the battery compartment.
2 Remove the used batteries.
3 Insert the new batteries correctly.
4 Close the battery compartment.
Advertisement
Chapters
Table of Contents
Troubleshooting
