Philips BDP7320/F8 User Manual page 48

Philips blu-ray disc player user manual
Hide thumbs Also See for BDP7320/F8:
Table of Contents

Advertisement

Category
Audio
Analog Audio
• When HDMI cable is
connected, make
sure "HDMI Audio"
setting is set to "Off"
to change the
"Analog Audio"
setting.
Ratings Lock
Rating Level
• Refer to
page 56 for
more
information.
New PIN
48
EN
LIST OF SETTINGS
Menus/Options
Speaker Setup
Front (L/R)
• Refer to page 56
Center
for more
Surround (L/R) Large/Small/Off
information.
Surround Back
(L/R)
Subwoofer
Speaker Distance Unit
Front (L/R)
Center
Surround
Surround Back 0-10 ft default
Default
Speaker Level
Front (L)
Center
Front (R)
Subwoofer
Surround (R)
Surround (L)
Surround Back
(R)
Surround Back
(L)
All
8 [Adult]
to
1 [Kid Safe]
Large/Small
Sets the speaker configuration to
match the size / number of your
Large/Small/Off
speakers.
• You can also output the test tone
Large/Small/Off
from each speaker by pressing
[RED].
On/Off
Feet
Sets the desired measure system.
This measure system will be used for
Meters
"Speaker Distance" setting.
0-60 ft default
Select the distance from the listening
is 10 ft
point to the speaker to get the ideal
delay time.
5-10 ft default
is 10 ft
0-10 ft default
is 10 ft
is 10 ft
Yes/No default
is "No"
Sets the volume level for each
speaker to get the ideal audio
balance.
default
0-12 dB
is 0 dB
Sets the rating level for the disc
playback.
Sets the new password for the
"Ratings Lock" setting.
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdp7320/f7Bdp5010Bdp7320

Table of Contents