Category
Audio
Night Mode
Down Sampling
Virtual Surround
Blu-ray Disc Audio
HDMI Audio
• This feature is
available only when
the display device is
connected by an
HDMI cable.
• Refer to page 53 for
more information.
Digital Out
• When HDMI cable is
connected, make
sure "HDMI Audio"
setting is set to "Off"
to change the
"Digital Out"
setting.
• Refer to page 55 for
more information.
LIST OF SETTINGS
Menus / Options
Auto
On
Off
On
Off
On
Off
Mix Audio Output
Primary Audio Only
HDMI Normal
PCM
Off
Bitstream
PCM
Description
Compresses range between soft and
loud sounds.
"Auto":
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
"On":
Activates the Night Mode.
"Off":
Deactivates the Night Mode.
Sets the sampling rate for outputting
PCM audio from the digital output
(coaxial).
"On":
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
"Off":
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Select "On" to enjoy stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
"Mix Audio Output":
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
"Primary Audio Only":
Only audio for the primary video will
be output.
When playing back a BD-video which
only contains primary audio, the
audio output will be the same case as
"Primary Audio Only" even if the "Blu-
ray Disc Audio" is set to "Mix Audio
Output".
Sets the audio format for sound
output from the HDMI OUT jack.
Sets the audio format for the sound
output from the DIGITAL OUT
(COAXIAL) jack.
EN
EN
47