Norcold DE-541 Owner's Manual page 7

3. Remove all storage bins from the door by lifting
up and pulling outward (see Figure 8 for location).
Travel Latch
Bottom Hinge Pin
Figure 8
4. Using the slotted screwdriver, remove the top and
bottom hinge pins (see Figure 8 for location).
5. Remove the door by opening slightly and pulling
the bottom of the door away from the refrigerator.
Allow room to slide door down off the upper hinge
pin shoulder (see Figure 9).
Figure 9
Removing and Relocating the Hinge Bracket
6. Using the #2 phillips screwdriver, remove the top
hinge bracket by removing three screws securing
the bracket in place. Save the screws for later
reassembling (see Figure 10).
7. Using the #2 phillips screwdriver, remove the three
screws on the opposite side corresponding to the
top hinge bracket. Relocate the screws in the holes
exposed by the removal of the top hinge bracket.
8. Using the #2 phillips screwdriver, remove the
bottom hinge bracket by taking out the three
screws holding the bracket in place. Save screws
for later reassembling (see Figure 10).
Top Hinge Pin
Figure 10
Storage Bins
10. Reposition the bottom hinge bracket in the top
Figure 11
11. Reposition the top hinge bracket in the bottom
Removing and Relocating Travel Latch
12. Using the #2 phillips screwdriver, remove the two
13. Using the #2 phillips screwdriver, remove the two
7
9. Using the #2 phillips screwdriver, remove the
three screws on the opposite side corresponding
to the bottom hinge bracket. Relocate the screws
in the holes exposed by the removal of the bottom
hinge bracket.
corner of the refrigerator where the hole plugs
previously were. Attach hinge bracket using the
three screws previously removed. Do not tighten
screws (see Figure 11).
corner of the refrigerator where the screws pre-
viously were. Attach hinge bracket using the three
screws previously removed. Do not tighten screws.
screws securing the travel latch to the refrigera-
tor. Save the screws for later reassembling (see
Figure 12 on page 7).
screws on the opposite side corresponding to the
travel latch. Relocate the screws in holes ex-
posed by removal of the travel latch.
Remove 3 screws from
top and bottom hinges