Philips BDP5010/F7 A User Manual page 35

Category
Audio Analog Audio
• When HDMI cable is
connected, make
sure "HDMI Audio"
setting is set to "Off"
to change the
"Analog Audio"
setting.
Ratings Lock Rating Level
• Refer to
page 41 for
more
information.
New PIN
Others Angle Icon
Auto Standby
Front Panel Brightness Bright
Screen Saver
Slide Show
LIST OF SETTINGS
Menus/Options
Speaker Setup Front (L/R)
• Refer to page 41
Center
for more
Surround (L/R) Large/Small/Off
information.
Subwoofer
Speaker Distance Unit
Front (L/R)
Center
Surround
Default
Speaker Level Front (L)
Center
Front (R)
Subwoofer
Surround (R)
Surround (L)
All
8 [Adult]
to
1 [Kid Safe]
On
Off
On
Off
Dim
Auto
On
Off
Slide Show Interval 5sec
10sec
Slide Show Cut In/Out
Transition
Fade In/Out
Large/Small Sets the speaker configuration to
match the size/number of your
Large/Small/Off
speakers.
• You can also output the test tone
On/Off
from each speaker by pressing [RED].
Feet Sets the desired measure system.
This measure system will be used for
Meters
"Speaker Distance" setting.
0-60 ft default Select the distance from the listening
is 10 ft point to the speaker to get the ideal
delay time.
5-10 ft default
is 10 ft
0-10 ft default
is 10 ft
Yes/No default
is "No"
Sets the volume level for each
speaker to get the ideal audio
balance.
default
0-12 dB
is 0 dB
Sets the rating level for the disc
playback.
Sets the new password for the
"Ratings Lock" setting.
"On":
The angle icon automatically
appears on the TV screen when
playing back content with various
camera angles available.
"Off":
The angle icon does not
automatically appear on the TV
screen when playing back content
with various camera angles available.
Sets whether to turn off the unit (to
the standby mode) automatically
after 25 minutes of no action since
the screen saver is activated.
• If the screen saver is off, the unit will be
turned off after 30 minutes if no action.
Sets the brightness of the front panel
display.
When "Auto" is selected, the front
panel display automatically goes dim
during playback.
Sets whether to activate the screen
saver after 5 minutes of no action on
the unit.
Sets the amount of time for
displaying one picture before
switching to the next one.
For example, select "5sec" to switch
the picture every 5 seconds.
Sets the visual effect for the slide
show transition mode.
"Cut In/Out":
The pictures will cut in and out
sharply as playback progresses.
"Fade In/Out":
The pictures will fade in and out as
playback progresses.
Description
EN 35