Maintenance
Machine Tie-Downs (Deluxe)
There are two tie points located in front of the rear
wheels on the frame, one on the front bumper tie-down
bar, and a Tie-down wrap point on the recovery tank.
Tie-down devices must be of the proper type and
strength. The combined strength of all tie-downs must
be strong enough to lift two times the weight of the
machine. Tie-downs must be positioned to prevent the
machine from moving forward, backward, or either side
to side. Use all four corners of the machine with the tie-
downs running out opposite directions. Tie-downs must
Recommended Tie-Down Points
be attached to the transporting vehicle securely.
CONN
AT
FRA
86333220 CS20
53