Device Settings - Fakir T10 series User Manual

25 Changing settings
• Hide image overlay graphics: Hide all overlay graphics and image overlay information.
For more information, see section 15.8 Hiding all overlay, page 58.
• Calibrate: Perform a manual calibration of the camera. For more information, see sec-
tion 15.7 Calibrating the camera, page 58.
• Auto-adjust the manual temperature scale: Perform an automatic adjustment of the im-
age while remaining in manual image adjustment mode.
• Switch Thermal <> Digital camera: Switch between the image modes Thermal and Digi-
tal camera. For more information, see section 16 Working with image modes, page 60.
• Switch Thermal <> Thermal MSX: Switch between the image modes Thermal and Ther-
mal MSX. For more information, see section 16 Working with image modes, page 60.
• Switch 1x zoom <> Max zoom: Switch between the digital zoom factor of 1× and maxi-
mum zoom.
• Switch camera flash On <> Off: Switch between the activated/deactivated camera flash
function. For more information, see section 13.12 Using the camera lamp as a flash,
page 38.
Note The flash function will not be activated if the setting Lamp & laser is set to the
option Disable all. For more information, see section 25.1.5 Device settings, page 85.
• Switch single shot <> Video: Switch between the recording modes Single shot and
Video.
• Switch between two latest palettes: Switch between the two last-used color palettes.
For more information, see section 15.5 Changing the color palette, page 56.
• Switch temperature range: Cycle through the camera temperature ranges. For more in-
formation, see section 25.1.2 Camera temperature range, page 83.
Additional options for the hardware buttons
• Autofocus.
• Continuous autofocus.
• Switch screen rotation On <> Off.
• Save.
• Save + Prompt for note.
• Save + Prompt for table.
• Save + Prompt for voice annotation.
• Save + Prompt for sketch.
• Save + Select annotation from menu.
• Preview.
• Preview + Prompt for note.
• Preview + Prompt for table.
• Preview + Prompt for voice annotation.
• Preview + Prompt for sketch.
• Preview + Select annotation from menu.

25.1.5 Device settings

• Language, time & units: This submenu includes settings for a number of regional
parameters:
◦ Language.
◦ Temperature unit.
◦ Distance unit.
◦ Time zone
◦ Date & time.
◦ Date & time format.
• Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
#T559954; r. AL/37426/37426; en-US
and :
85