Table of Contents
Advertisement
17
Working with measurement tools
Follow this procedure:
1. To set up an alarm for a difference calculation, do the following:
• If you are defining user presets, select
submenu.
• If you are editing an image in the archive, select
a submenu.
2. Select
(Select). This displays a dialog box.
3. Select Delta. This displays a context menu.
4. Use the joystick to go to
5. Push the joystick. This displays a dialog box where you can define the settings for the
alarm.
• Alarm condition: The condition that triggers the alarm. Applicable values are Above,
Below, or Off.
• Alarm limit: The temperature value that will be the critical condition when an alarm is
triggered or not.
• Alarm sound: Applicable values are Beep or No sound.
6. Push the joystick. This closes the dialog box.
#T559954; r. AL/37426/37426; en-US
(Add measurement). This displays a
(Measurement). This displays
(Set alarm on delta).
70
Advertisement
Table of Contents
