Procedure - Fakir T10 series User Manual

14 Saving and working with images

14.2.2 Procedure

Follow this procedure:
1. To save an image, push the Save button fully down.
Note Depending on the settings in
may happen:
• A preview image is displayed before the image is saved.
• An annotation tool or the annotation menu is displayed when the image has been
saved.
14.3 Previewing an image
14.3.1 General
You can preview an image before you save it. This enables you to see if the image contains
the information you want before you save it. You can also adjust and edit the image.
Note The camera must be configured to display a preview image before saving. Select
(Settings) > Save options & storage > Preview image before saving = On.
14.3.2 Procedure
Follow this procedure:
1. To preview an image, push the Save button fully down. This displays the preview.
2. Manual image adjustment mode is now active, and the status icon
For image adjustment instructions, see section 15.3 Adjusting the infrared image, page
53.
3. To edit the image, push the joystick. This displays a context menu. For editing instruc-
tions, see section 14.5 Editing a saved image, page 49.
4. Do one of the following:
• To save the image, push the Save button fully down.
• To exit preview mode without saving, push the Back button
14.4 Opening a saved image
14.4.1 General
When you save an image, the image file is stored on the memory card. To display the im-
age again, open it from the image archive.
14.4.2 Procedure
Follow this procedure:
1. Push the Image archive button
2. Move the joystick up/down or left/right to select the image you want to view.
3. Push the joystick. This displays the image at full size.
#T559954; r. AL/37426/37426; en-US
(Settings) > Save options & storage, the following
.
is displayed.
.
48