Installing The Paper Roll On The Vx680; Charging The Vx680; Turning On And Turning Off The Vx680; Turning On The Vx680 - adyen VX680 User Manual

Installing the paper roll on the VX680

Lift the printer cover latch to open it, and then lift the cover.
1.
Remove any partial roll of paper in the printer tray.
2.
Loosen the glued leading edge of the paper or remove the protective strip from the new roll of paper.
3.
Unwind the paper roll past the glue residue.
4.
Hold the roll so that the paper feeds from the bottom of the roll when the terminal is inverted.
5.
Drop the paper roll into the printer tray and close the latch.
6.
Close the cover and tear off any excess paper.
7.

Charging the VX680

Connect the charging cradle to the power supply cable, and then the power supply to the electrical grid.
1.
Place the VX680 terminal on the cradle to charge the device and to power it on.
2.
To fully charge the VX680, place it on the cradle for at least 6 hours, until the led indicator remains lit.
3.

Turning on and turning off the VX680

Turning on the VX680

Press and hold
When the device is fully booted, it displays the Adyen logo or the merchant logo, in case you provided us with
a logo and we have already registered the terminal to your account.

Turning off the VX680

Press and hold

Connecting the VX680 to your Wi-Fi network

Press
1.
Enter the security code to unlock the device.
2.
If you do not know the code, contact the
for your device.
Choose Network config
3.
Choose Setup Wi-Fi
4.
The device scans for available networks.
5.
Choose the desired network you want to connect the device to.
6.
If prompted, enter the passcode to access the Wi-Fi network.
7.
Page 5 | © 2016 Adyen BV | Confidential
for a couple of seconds.
. The device will beep repeatedly and then power down.
+ 9.
.
.
Adyen POS Support Team to obtain the specific security code