HP Photosmart E217 Quick Start Manual page 64

Lee_Jackie_QSG_e_4.fm Page 14 Tuesday, March 29, 2005 3:57 PM
the installation window does not appear, click Start, click
Run, type D:\Setup.exe, where D is the letter of your CD
drive, then click OK.
3. When the HP Image Zone software has finished
installing, re-enable any virus protection software that you
disabled in Step 1.
Macintosh
To install the HP Image Zone software successfully, your
Macintosh computer must have built-in USB, 128 MB of
physical RAM, Mac OSX v10.2 or later, and 250 MB of disk
space.
1. Close all programs and temporarily disable any virus
protection software running on your computer.
2. Insert the HP Image Zone software CD into the CD drive
of your computer.
3. Double-click the CD icon on the computer desktop.
4. Double-click the installer icon, and then follow the on-
screen instructions.
5. When the HP Image Zone software has finished
installing, re-enable the virus protection software that you
disabled in Step 1.
14
HP Photosmart E217/E317 Quick Start Guide