Settings - Goodmans GHD1621F2 Instruction Manual

Settings

Resetting the Digital TV Recorder
to the factory settings
Press SETUP.
1
Select System Setting then Factory Setting.
2
There are five options:
3
Restore Confirm you want to reset the
Default Digital TV Recorder to the factory
Settings default settings. Select Confirm
and press OK.
Delete All Choose Confirm and press OK.
Channels All your channels will be deleted.
You can always re-scan to retrieve
them. See Rescanning for new
channels opposite.
Format Choose Confirm and press OK.
Hard Disk Warning: this will delete all
recorded programmes.
Software Select Auto and set a time to
Update allow the Recorder to update
to new software whenever it
is available. Select Manual,
highlight Scan and press OK
to update immediately to any
available new software.
Change See Changing your pin code on
Pin Code page 14.
Press SETUP to exit.
4
Retuning for new channels
When the digital switchover happens in your
area, your Digital TV Recorder may show that it
has no signal. You'll need to re-tune. Similarly, if
new Freeview channels are added, you'll need to
re-tune your Digital TV Recorder to receive them.
Press SETUP.
1
Select System Setting then
2
Channel Setting.
Choose Channel Tuning and select
3
Auto Scan.
Press OK. Your Digital TV Recorder will
4
wipe and then re-scan for channels.
Manually scanning for channels
We recommend that only advanced users scan
for channels manually. The UHF channel number
will need to be entered before scanning.
07
15