Water Package; Mist Cooler System - HTC DURATIQ T6 User Manual

HTC DURATIQ
While the RF LED is lit according to step 3 above, press any button on all remote controls
that are to be paired with the GPS tracker. Check that the RF LED goes out and lights up to
confirm the pairing when the button on the remote control is pressed in.

7.5 Water package

7.5.1 Mist Cooler System

Machines from HTC can be equipped with a Mist Cooler system for effective cooling of the
grinding tools. The Mist Cooler System can be offered as a retrofit.
The Mist Cooler System creates a very finely divided water mist that is distributed on the floor
surface through a nozzle. The system is used to obtain a better performance during grinding,
while it is possible to grind dry and use a standard dust extractor for the dust. This cools the
tools and makes grinding more effective. The Mist Cooler System reduces the risk of the
diamond tools "glazing over".
The system uses the water in the tank. When the water level is low, the mist symbol changes
colour to yellow.
Grinding
Attach the appropriate tool to the machine.
Set the handle to the working position.
Fill the tank with cold water.
Start the Mist Cooler System by pressing the
button on the control panel. When the
system is active, the symbol on the display
for the Mist Cooler System is lit.
When grinding is finished, the Mist Cooler
System also switches off. If the Mist Cooler
System is still active, this is indicated by a
flashing symbol. Press again to activate.
D002998, 01.06 www.htc-floorsystems.com
Accessories
53