Gps Tracker; Start Up - HTC DURATIQ T6 User Manual

HTC DURATIQ

7.4 GPS Tracker

7.4.1 Start Up

1 Start up outdoors so the GPS tracker has free sight for positioning.
2 Start the grinding machine with the
3 Remove the GPS tracker (1) from the holder and push in the voltage cable (2) at the
same time as the cover comes loose (3).
4 Start the GPS tracker by moving the power switch (4) on the GPS tracker to position 1.
Wait until the green diode (6) lights up. Start up can take up to 30 seconds.
5 Replace the cover (3) making sure at the same time that it seals.
6 Replace the GPS tracker in the holder on the grinding machine. Make sure that the
cabling is not lying against a cooling flange or fan.
7 The GPS tracker searches for its position for approx. 2 minutes. This is not indicated by
any diode.
8 Ring the GPS tracker's mobile number (see enclosed envelope) using any mobile phone.
After a couple of signals, the call is disconnected and within a few minutes you receive a
text message with date, time (GMT), position and a link to a map where the position of the
GPS tracker is marked (needs Internet connection).
9 Charge the GPS tracker's internal battery by keeping the grinding machine connected to
the mains electric for at least 8 h.
50
On/Off button.
www.htc-floorsystems.com
Accessories
D002998, 01.06