Table of Contents
Advertisement
Boost Function
This function allows for rapid heating on the selected zone.
Once the selected zone has reached the required cooking
temperature the power level will reduce automatically to the
preset level.
To activate the pre-heat function
1.
Select the required cooking zone with a boost function.
Raise the power level number to 9.
2.
Press the + button once more. 'P' will show in the display
(Fig. 2.5).
3.
Activating the booster may cause the requested power
to exceed the maximum possible power and the power
management to become active.
4.
A necessary power reduction of the other cooking zone
of the same induction system is indicated to the user by
the allocated display flashing; it offers a correction time
of 3 sec. before the power reduction to the necessary
reduced power level (cooking stage) takes place. The
boost function has a time limit in the system.
The power density during boost mode may be too high when
heating oil, e.g. deep fat frying, and the base of the pot may
overheat. To achieve maximum system performance, you
mucst not use the boost function heat oil.
0
P
5
0
Fig. 2.5
0
Advertisement
Table of Contents
