Advertisement

Quick Links

RMB60HPEIGL/
Induction Hob
User Guide
&
Installation & Service Instructions
U110602-05

Advertisement

Table of Contents
loading

Summary of Contents for Range Master RMB60HPEIGL

  • Page 1 RMB60HPEIGL/ Induction Hob User Guide & Installation & Service Instructions U110602-05...
  • Page 3: Table Of Contents

    Contents Before You Start... Installation Installation and Maintenance Dear Installer Ventilation Safety Requirements Personal Safety Provision of Ventilation Hob Care Location of the Hob Cleaning Positioning the Hob Electrical Connections Hob Overview Circuit Diagram The Hob Heat Settings Technical Data Pan Detector, Warranty/After Sales Service Residual Heat Indicator, ‘H’...
  • Page 5: Before You Start

    Before You Start... DO NOT spray aerosols in the vicinity of the hob Thank you for buying a Rangemaster hob. It should give you while it is on. many years trouble-free cooking if installed and operated correctly. It is important that you read this section before Use dry oven gloves when applicable –...
  • Page 6: Hob Care

    Hob Care Cleaning DO NOT use the hob surface as a cutting board. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. DO NOT leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.g.
  • Page 7: Hob Overview

    Hob Overview DocNo.023-0002 - Overview - RI77 hob When you first switch on the hob after connection, a rapid Fig. 2.1 self-test of the control unit (calibration adjustment) is then Diameter: 180 mm Diameter: 220 mm carried out. Max: 1.4 kW Max: 1.85 kW The induction hob comprises of four cooking zones Boost: 2.1 kW...
  • Page 8: Heat Settings

    Heat Settings Power level Type of cooking Switched off The exact setting will depend on several factors, including Melting (butter/chocolate) or your cookware and the amount you are cooking. Experiment keeping food warm with the induction hob to find the settings that best suit you. Keeping food hot or to heat small Table 2.1.
  • Page 9: Boost Function

    Boost Function Fig. 2.5 This function allows for rapid heating on the selected zone. Once the selected zone has reached the required cooking temperature the power level will reduce automatically to the preset level. To activate the pre-heat function Select the required cooking zone with a boost function. Raise the power level number to 9.
  • Page 10: Key Lock Function

    Key Lock Function Fig. 2.6 This allows the control panel to be locked to prevent any accidental use. IMPORTANT: The hob is equipped with a key lock to lock the controls. This can be used when all hobs are off. To switch on the key lock Press the right front zone button and “-”...
  • Page 11 Over-Temperature Protection A temperature sensor can monitor the temperature within the Induction hob. When an excessive temperature is monitored, the Induction hob will stop operation automatically. Small object safety When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item (e.g. knife, fork, key) has been left on the hob, the hob will automatically go into standby within 1 minute.
  • Page 12: Cleaning Your Cooker

    ArtNo.040-0002 - Cleaning - 90 induction GENERIC Cleaning Your Cooker Isolate the electricity supply before carrying out any major Fig. 3.1 cleaning. Allow the cooker to cool. Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt.
  • Page 13: Troubleshooting

    Troubleshooting DocNo.050-0001 - Troubleshooting - Induction GENERIC Interference with and repairs to the hob MUST NOT My hob is scratched be carried out by unqualified persons. Do not try Always use the cleaning methods recommended in this to repair the hob as this may result in injury and guide, and make sure that the pan bottoms are smooth and damage to the hob.
  • Page 14 Error display Description Possible fault cause Fault correction ER03 and permanent Continuous button actuation; control Water or cookware on the glass over Clean the user interface switches off after 10 secs the control tone ER22 Button analysis defective, control switches Short circuit or interruption in area of Replace control off after 3.5-7.5 sesz...
  • Page 15: Installation

    INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details The hob may be installed in a kitchen/kitchen diner but NOT below in a room containing a bath or shower.
  • Page 16: Positioning The Hob

    INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Positioning the Hob Fig. 5.1 It is recommended that the hob be installed in a worktop with a minimum thickness of 38 mm and depth of 600 mm. The cut-out dimensions and the recommended minimum clearances from the hob to nearby surfaces are shown in (Fig.
  • Page 17: Electrical Connections

    INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Electrical Connections Fixing the seal to the back of the hob The hob must be sealed to the work surface to prevent liquid This appliance must be installed by a qualified electrician from entering into the cabinet.
  • Page 18: Circuit Diagram

    Circuit Diagram...
  • Page 19: Technical Data

    Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob. COUNTRY OF DESTINATION: GB, IE. Dimensions Outside Inside Width 510 mm 485 mm Length 580 mm 550 mm Depth 53 mm from top 49 mm Space for fixing See Positioning of the Hob “Fig.
  • Page 20 Hotplate Efficiency Data Brand Rangemaster Model Identification RMB60HPEIGL/ Size (mm) Type Induction Type of Hob Induction Number of electric zones Zone 1 - Ø cm Electromagnetic Heating Technology heating Energy Consumption (ECElectric cooking) - Wh/kg 162.3 Zone 2 - Ø cm...
  • Page 21: Warranty/After Sales Service

    Warranty/After Sales Service DocNo.111-0003 Warranty No.10 If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery.
  • Page 24 Clarence Street, Royal Leamington Spa, Warwickshire, CV31 2AD, England. Tel: +44 (0) 800 8046261 E-mail: consumers@agarangemaster.co.uk...

Table of Contents