Table of Contents
Advertisement
Check the appliance is electrically safe and gas sound when you have finished.
5.
Installation
Dear Installer
Before you start your installation, please complete the details
below
Installer's Name
Installer's Company
ArtNo.050-0011 - Installer information table
Installer's Telephone Number
Appliance Serial Number
Should your customer have a problem relating to your
installation they will be able to contact you easily.
Safety Requirements
The hob must be installed in a well-ventilated space, in
accordance with the section entitled 'Electrical Connection' .
Read these instructions before installing or using the
appliance.
Provision of Ventilation
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
INSTALLATION
Location of the Hob
The hob may be installed in a kitchen/kitchen diner but NOT
in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
This appliance should not be installed in a boat or
n
n
caravan.
The hob must be installed in accordance with the relevant
Building regulations and IET regulations.
You will need the following equipment to complete the hob
installation satisfactorily:
• Multimeter (for electrical tests)
You will also need the following tools
1.
Electric drill
2.
Jigsaw
3.
Steel tape measure
4.
Cross head screwdriver
5.
Pencil
6.
Sharp knife
Checking the parts
• Induction hob
• Seal
Check that the appliance is in a good condition after having
removed the packaging. In case of doubt, do not use the
appliance and contact the retailer.
Never leave the packaging materials (cardboard,
n
n
plastic bags, polystyrene foam, etc.) within children's
reach since they could become potential sources of
danger.
11
Advertisement
Table of Contents
