Preset Mode - Dick Smith DSLED42UHDYA User Manual

PC Connections
This TV provides an analogue VGA input (15pin) for connection to various desktop or laptop computers. Refer to
your computer's User manual or support website to determine if your computer may be compatible, and what
connection cabling will be needed.
STEPS:
Be sure both the TV and computer are set to
Power off.
1.Connect a VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This connection and power-up sequence is very
important. Also, for higher resolution
applications, the use of a high quality shielded
VGA cable is recommended.

PRESET MODE

RESOLUTION
1 720*400
2 640*480
3
800*600
4
800*600
5 800*600
6 1024*768
7
1024*768
The above resolutions are the only ones guaranteed to be supported. Other resolutions may also be
supported, but this must be assessed by the user on a case-by-case basis. This is also subject to the
limitiations of the computer's video card.
ADJUSTABLE MODES
While this TV may support higher resolutions thru either the VGA or HDMI inputs, such operation is dependant on
the capabilities of the attached PC (including its graphics card, system set-up and operating system) as well as the
user's ability to adjust the PC's settings for optimum screen performance. Some PC graphics cards will not
correctly identify the TV's capabilities and hence will only allow lower resolution screen displays.
VGA and audio cable
not supplied
V.Freq.(Hz)
70
60
56
60
72
60
70
-12-
INSTALLATION
AV INPUT
H.Freq.(kHz)
31.47
31.47
35.156
37.88
48.08
48.36
56.48