Ricoh G190 Service Manual page 277

2921 [S: HH SP: 2nd] Smaller than A5 HH Special paper, 2nd side
2921 001 T2 Switch Timing
2921 002 T2 Correction
[Separa. : LE: HH] Separation Voltage: Correction for HH Humidity at the
Leading Edge
(Paper Type, Process Speed, [Color]) Paper Type -> Normal, Thin
2930 Process Speed -> LS: Low speed, RS: Regular speed
The value displayed on the LCD is different from these SP's values.
For example, "20%" on the LCD actually means 100%.
2930 001 Normal: RS: [K]
2930 002 Normal: RS: [FC]
2930 003 Normal: LS: [K]
2930 004 Normal: LS: [FC]
2930 005 Normal 2: RS: [K]
2930 006 Normal 2: RS: [FC]
2930 007 Normal 2: LS: [K]
2930 008 Normal 2: LS: [FC]
2930 009 Thin: RS: [K]
SM
different from these SP's values. For
example, "4%" on the LCD actually
means 20 %.
*EGB
[0 to 200 / 15 / 1 mm/step]
[0 to 1275 / 0 / 5%/step]
The value displayed on the LCD is
*EGB different from these SP's values. For
example, "20%" on the LCD actually
means 100%.
*EGB [0 to 400 / 200 / 5%/step]
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
5-105
Service Mode Table
G190