Table of Contents
Advertisement
Assembly Instructions
Step 5
To mount the pedal (12)
assembly, locate the
pedal Axle (15) through
the hole in the front of
the main frame and push
on the washer (14) right
up to the frame.
There should be equal
overhang of the spindle
either side of the main
frame. Locate the pedal
(12) on the spindle
and secure in position
using 2 x M8 Lock
nuts (10) and Φ8 Big
washers (11).
Ideally, the nuts want
tightening simultaneously.
Finally, insert the
computer (5) to
the computer holder.
Step 6
The rear stabilizer will fold
down for easy storage.
Simply remove the Lock
pin and reposition the
stabilizer flat. The Lock
pin will now go in the
lower hole of the half
round bracket.
Free area and
Training area
The free area shall be
not less than 0.6 m
greater than the training
area in the directions
from which the
equipment is accessed.
The free area must also
include the area for
emergency dismount.
Where equipment is
positioned adjacent to
each other the value of
the free area may be
shared.
7
5
15
12
14
11
10
0.6m
(Free area )
12
6
14
37
0.6m
(Free area )
rower and user
Training area 1.2m
0.6m
(Free area )
10
11
0.6m
(Free area )
Advertisement
Table of Contents
