Install The Battery - Honeywell Dolphin 75e Quick Start Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

Install the Battery

Dolphin 75e models are designed for use with battery part numbers
BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02
(Li-ion 3.7 V, 12.358 watt hour), manufactured for Honeywell International
Inc.
The Dolphin 75e is shipped with the battery packaged separately from the
terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
2
5
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
Note: Standard model battery and
battery door shown.
1
6
4
3
Apply pressure to the
edges of the battery door
before engaging the lock
to ensure the door is
properly closed.

Advertisement

Table of Contents
loading

Table of Contents