Scan A Bar Code With The Scan Demo - Honeywell Dolphin 75e Quick Start Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

Scan a Bar Code with the Scan Demo

1. In the Apps list, touch ScanDemoW10
2. Point the terminal at the bar code.
Note: For optimum performance,
avoid reflections by scanning
the bar code at a slight angle.
3. Touch Scan on the touch screen or press and hold one of the Scan
buttons. Center the aiming beam over the bar code.
The decode results appear on the screen.
About the Aiming Beam
The terminal projects an aiming beam that should be centered over the bar
code, but it can be positioned in any direction for a good read.
The aiming beam is smaller when the scanner is closer to the code and
larger when it is farther from the code. Hold the scanner close to smaller bar
codes, and farther away from large bar codes to get a proper read.
If the bar code is highly reflective (e.g., laminated), you may need to tilt the
scanner at an angle so the bar code can be scanned.
Linear Bar Code
2D Matrix Symbol
.

Advertisement

Table of Contents
loading

Table of Contents