Canon MB2700 series Online Manual page 939

5. Press Color button for color transmission, or Black button for black & white transmission.
The printer starts scanning the document.
Important
• Color transmission is available only when the recipient's fax device supports color faxing.
• Do not open the document cover until scanning is completed.
6. Start sending.
• If you load the document in the ADF:
The printer scans the document automatically and starts sending the fax.
Note
• To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in
progress, press the Stop button, and then follow the instructions on the touch screen.
• If documents remain in the ADF after the Stop button is pressed while scanning is in progress,
Document in ADF. Tap [OK] to eject document. is displayed on the touch screen. By
tapping OK, the remaining documents are automatically ejected.
• If you load the document on the platen glass:
After scanning the document, the confirmation screen asking you if you load the next document is
displayed.
To send the scanned document, tap Send now to start sending it.
To send two or more pages, follow the message to load the next page, and tap Scan. After
scanning all pages, tap Send now to start sending.
Note
• To cancel sending the fax, press the Stop button.
Note
• When your printer is connected to a PBX (Private Branch Exchange) system, refer to the operating
instructions of the system for details on dialing the recipient's fax/telephone number.
• In case the printer was not able to send a fax, such as when the recipient's line was busy, it has the
function to automatically redial the number after a specified interval. Automatic redialing is enabled by
default.
Automatic Redialing
• Unsent documents, such as those pending redial, are stored in the printer's memory. They are not
stored in the case of a sending error.
Document Stored in Printer's Memory
• Do not unplug the power cord until all documents are sent. If you unplug the power cord, all unsent
documents stored in the printer's memory are lost.
939