Boss Audio Systems BV12.1MCH User Manual page 14

Interchangeable Housing Change Diagram
Assembling the shroud
Begining by hooking the area and press the shroud over the pod. The shroud will snap in
place. lighting the shroud by screws supplied.Removing shroud
Release screws and take out the shroud as diagram
Removing Screen back From The Housing
working on a soft surface to avoid damaging the plastic.
Insert the supplied pry tool between the Housing Screen back,
then press the pry tool to release the Screen back.
Assembling the screen back
Begin by hooking the area and press the Shroud/Screenback over the pod.
The Shroud/Screen back will snap in place.
Swivel cover moving/assembling
Use supplied small tool to insert the hook hole, and get the cover off.
Pressing the swviel cover over the swivel, the cover will snap in place
13
SNAP JOINT