Summary of Contents for Boss Audio Systems BV10.4IRF
Page 1
Monitor installation Releasing and opening the monitor Powering up the monitor Turning on the dome lights your Infrared audio transmission: BV10.4IRF • BV7IRF On screen menu system Troubleshooting Specifications BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - Contents...
Page 3
. SHOCK HAZARD! Do not open the case of this product. There are dangerous voltages present within the unit. There are no user-serviceable parts within the unit. BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 3...
Page 4
This may loosen the mounting screws and cause it to fall down. BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual- page 4 Operating precautions Turn the unit off when it is not in use.
Page 5
• Wireless remote control with battery • Video/power interface cable with inline fuse • Metal mounting plate • Black machine screws (for attaching monitor to mounting plate) infrared BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 5...
This button enables the on-screen display menu system. Once enabled, this button is used as an ENTER button. BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 6 POWER ON/OFF This button turns the monitor system on and off.
(as shown below) and slide the drawer out. Insert a new battery and push the drawer back fully into the remote. POWER SLEEP Battery Release button BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 7 – MODE...
Page 8
Using the wires provided, complete the audio, video and power connections in your vehicle as shown in the diagram below. BLACK BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 8 VIDEO INPUT 1 (YELLOW) VIDEO INPUT 2...
Page 9
(YELLOW) VIDEO INPUT 1 (WHITE) BLACK FUSE Battery DOME LIGHTS BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 9 VIDEO SOURCE 2 (DVD player, video game, etc. AUDIO/VIDEO SOURCE 1 (DVD player, video game, etc. VIDEO RIGHT...
BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 10 If you have any doubts about this type of installation, please consult your local mobile electronics retailer.
Page 11
“click.” Test that it is secured by gently pulling down on monitor frame. Pull the monitor screen down to the desired angle BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 11...
Page 12
This unit features a three-position switch for the dome lights. The switch is located near the monitor release button. The three positions are ON, ON when the car dome lights are on, and OFF. BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual- page 12...
Page 13
If you choose to sit to one side of the monitor, you can expect good reception within 35º to the right or left of the monitor. BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 13...
< and > keys to choose the input source). RESET (YES means return monitor to factory defaults, NO means keep custom settings you have created). BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 14...
Move to another area with better reception, if possible. Replace battery. Be sure when being used, the remote is being pointed directly toward the player or remote IR sensor (if installed). BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 15...
Resolution, pixels Brightness GENERAL Operating voltage Dimensions (L x W x H) All specifications subject to change without notice. BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 16 BVFL10.4 10.4" Flip Down TFT Monitor 10.4" NTSC/PAL auto-compatible...