D-Link DAP-2695 Quick Install Manual page 4

To power the access point, you can use one
of the following 3 methods:
Method 1 - Use if you have a
Method 2 - Use if you do not
Method 1
1. Connect one end of your Ethernet cable
into the LAN1 (PoE) port on the DAP-
2695.
2. Connect the other end into one port on
a PoE switch.
Method 2
1. Connect one end of an Ethernet cable
into the Data In port on the PoE base
unit and the other end into one port on
your computer.
2. Connect one end of an Ethernet cable
into the P+Data Out port on the PoE
base unit and the other end into the
LAN1 (PoE) port on the DAP-2695
access point.
3. Use the supplied power adapter.
Connect the power adapter to the
Power In receptor on the PoE adapter.
4. Connect the other end of power
adapter into a power outlet.
Note: Purchase separately a DPE-101GI
PoE injector if you need to connect the
Access Point without a PoE Switch
4
PoE switch.
have a PoE switch
and do not have a
power outlet near
the location of the
access point.
D-Link DAP-2695 Quick Install Guide