Song; Listen To The Songs; Song Control - Kurzweil KP110 User Manual

The instrument has a variety of songs, and each song can be practised in
the smart learning mode.

Listen to the songs

1.
Press the [SONG] button to enter the song mode. The LCD shows
"SONG" and it will play all songs circularly.
2.
Use the data dial, [+/YES] or [-/NO] button to select a song.
3.
During song playback, press the [START/STOP] button to stop the
song, press it again to play the current song repeatedly.
4.
When the song is stopped, press the [STYLE], [RECORD], [VOICE],
[DUAL] or [LOWER] button to exit the song mode.

Song Control

1.
Introductory Beat
Before song start playing, it has the introductory beat; the measure
starts from negative value. It begins to play the melody when the
measure goes to 1.
2.
REW, FF and PAUSE
When the song is playing:
Press the [ ] button to fast forward the song.
Press the [ ] button to rewind the song (base on the measure).
Press the [ ] button to pause the playing song, press it again to
continue playing.
3.
Song Repeat
When playing the song, press the [
section of the current song, then press it again to set the loop end.
When in loop status, press [
] to set the beginning for a loop
] again to quit the loop playing status.

Song

SONG
START/ SYNC INTRO/
STOP START ENDING FILL A FILL B
31