Table of Contents
Advertisement
Compass (If Equipped)
By selecting the item Compass, you can make the follow-
ing adjustments:
• Compass Calibration
• Compass Variance
TRIP COMPUTER
The Trip computer is used to display information on car
operation when the key is turned to the RUN position.
This function allows you to define two separate trips called
"Trip A" and "Trip B" where the car's complete trips are
monitored in an independent manner.
Both trips can be reset (reset - start of a new trip). To
perform a reset, push and hold the OK button on the
steering wheel controls.
"Trip A" and "Trip B" are used to display the figures
relating to:
• Distance Travelled
• Average Consumption
• Travel Time (driving time)
GETTING TO KNOW YOUR INSTRUMENT PANEL 133
Quantities Displayed
Distance Travelled
• Indicates the distance travelled by the start of the new
trip.
Average Consumption
• Represents the average fuel consumption since the start
of the new trip.
Travel Time
• Elapsed time since the start of the new trip.
OK Button
Short Push Of The Button: display of various parameters.
Long Push Of The Button: reset quantities and begin a new trip.
New trip
Starts after reset:
• Manual by pushing the OK button.
• Automatic when the distance reaches the value is
62140 (99999.9 km) or when the time travel reaches the
value of 999.59 (999 hours and 59 minutes).
• After each disconnection and reconnection of the battery.
4
Advertisement
Table of Contents
