Removing Gear Selector Bezel; Gear Selector Override Location; Freeing A Stuck Vehicle - Jeep RENEGADE 2017 Owner's Manual

Hide thumbs Also See for RENEGADE 2017:

Table of Contents

366 IN CASE OF EMERGENCY

Removing Gear Selector Bezel

4. Press and maintain firm pressure on the brake pedal.

5. Insert a small screwdriver or similar tool down into the

gear selector override access hole (at the right front

corner of the gear selector assembly), and push and hold

the override release lever down.

1 — Gear Selector Override Access Hole

6. Move the Gear Selector to the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the gear selector bezel.

If your vehicle becomes stuck in mud, sand or snow, it can

often be moved using a rocking motion. Turn the steering

wheel right and left to clear the area around the front

wheels. For vehicles with automatic transmission, push