Audiovox DT 911 Owner Operating Instructions page 23

.
.
-=
.
.Enter the memory location (00..20)
you wish to store the number in.
.Press REDIAL .
.Press MEM to store the number
and exit program mode. The unit
will emit a happy tone (a series of
short beeps) to confirm successful
programming.
.If programming is unsuccessful the
unit will generate an error tone.
imAi:1N~f Ro M;fMEMffR ~~~i:i~
~",."",..".-",,J...,~.'.~, ~~~
.Press TALK to get dial tone.
.Press MEM .
.Enter a 2 digit location number
(00..20)
~ The number stored in that location
will be automatically dialed.
Y.'II -
I ~
~
~
~
DIALING FROM MEMORY
PRESS e
PRESS e
ENTER MEMORY
LOCATION (OQ.20)
~'I
;:=::J)
If your phone is connected to a PBX
you can store the PBX access number
and a pause before the phone number.
For example, to store 9-PAUSE-555-
1234 in memory location 08, do the
following:
.Press PROG
.Press 08 (memory location)
.Press 9
.Press HOLD (pause)
.Dial 5551234
.Press MEM
~~~~§~
23
=tl
rf
dI911.p60
2J
199816122, p~ 06:31
.c-:~-
~ : ~
II
To insert a pause in a phone number,
press HOLD at the appropriate point
when entering the number. This inserts
a 2 second pause. For longer pauses,
press HOLD twoormoretimes. Each
press makes the pause 2 seconds
longer. and is treated as a stored digit.
To change or replace a stored number,
simply store a new number in the
desired memory location following the
instructions listed in STORING
MEMORY DIAL NUMBERS. See page
21.
To delete a stored number from
memory do the following:
.Press PROG to enter program
mode.
.Enter the memory location (00..20).
.Press MEM to exit program mode.