Hitachi C47-WD7000 Service Manual page 47

SERVICE ADJUSTMENTS
(11)
4:3 model
The digital convergence has 3 modes; NTSC 60p, PAL 100i and PAL 50p.
Change the other mode then adjust again (1) ~ (10).
16:9 model
The digital convergence has 4 modes; NTSC 60p, PAL 100i, PAL 50p
and PAL HD. (＊) Change the other mode then adjust again (1) ~ (10).
(＊)Adjustment Procedure of PAL HD mode.
(a)Receive 1080i(50Hz)
(b)Set the Picture mode to Favorite.
Film mode : Off
Dynamic Contrast : Off
Color Manager : Off
(c)Set Picture Size to 16:9 mode.
NOTES:
(1) [CH Ⅰ/Ⅱ] button ・・・Crosshatch/Video mode
Press [CH Ⅰ/Ⅱ] 5 times to display external signal.
Press [CH Ⅰ/Ⅱ] 5 times again to return to DCU internal cross-hatch.
(2) [MENU] button ・・・Remove color mode
Press [MENU] to switch between all colors displayed or adjustment color and Green only.
✧Press [0], then press [MENU]
✧Press [▲/ CH up], then press [MENU]
✧Press [▼/ CH down], then press [MENU]
Red and Green displayed (Blue removed)
Blue and Green displayed (Red removed)
Only Green displayed
47