Table of Contents
Advertisement
SETTINGS
SETTINGS
❏ Setting the speakers—car type,
speaker size and crossover frequency
Preparation:
Select the appropriate crossover network mode
beforehand. (Page 62)
1
Display the <Settings> screen.
On the Home screen:
KW-V230BT
KW-V330BT
2
Display the <Car Setting> screen.
3
Select a car type (1), select the location
1
of the speakers (2)*
, then display the
<Speaker Select> screen (3).
4
Select the speaker type (1), select the size
of the selected speaker (2), then display
the <X'over> screen (3).
KW-V430BT
KW-V630BT
• When a speaker is not connected, select
<None>.
• When setting the front speakers, also select
the speaker size for <Tweeter>.
5
Adjust the crossover frequency of the
selected speaker.
<TW Gain (L)>/
Adjusts the output volume of
<TW Gain (R)>
the tweeter (left/right).*
<TW FREQ>
Adjusts the crossover
frequency for the tweeter.*
<Gain>
Adjusts the output volume of
the selected speaker.
<HPF FREQ>
Adjusts the crossover
frequency for the front or rear
speakers (high pass filter).*
<LPF FREQ>
Adjusts the crossover
frequency for the subwoofer
(low pass filter).*
<Slope>/
Adjusts the crossover slope.*
<HPF Slope>/
<LPF Slope>
<Phase>
Selects the phase for the
subwoofer.*
1
*
Speaker location selection is available only when <X'over
Network> is set to [2way]. (Page 62)
2
*
Appears only when the front speakers are selected.
*
3
Adjustable only when <Tweeter> is set to <Small>,
<Middle>, or <Large> on the <Speaker Select>
screen.
*
4
Appears only when the front/tweeter or rear/mid range speakers
are selected.
*
5
Appears only when the subwoofer is selected.
6
*
Not adjustable when <HPF FREQ> or <LPF FREQ> is set to
<Through>.
2
*
3
2
*
3
4
5
6
5
ENGLISH
63
Hide quick links:
Advertisement
Table of Contents
