JVC KW-V230BT Instruction Manual page 40

SiriusXM® Satellite Radio SiriusXM® Satellite Radio
❏ Operation buttons on the source
control screen
• To display all available operation buttons, press
1
[ ]/[ ]* . All the other available buttons are
shown.
– To hide the window, press [ ]/[
[SXM1] – Selects the band.
[SXM4]
Displays the preset channel
[ ]
window. (See the far right column.)
• To hide the window, press [
[Song Title]/ Changes the displayed information
[Info]/ each time this button is pressed.
[Category]
[FNC J]* Displays the pop-up short-cut
2
menu. (Page 12)
• To close the menu, press [K].
Displays the Home screen.
3
[ ]*
Displays the <Channel List>
[ ]
screen. (Page 41)
[I/W]/[IW]* 1 Starts/pauses the content replay.
(Page 42)
[CHK]/[CHJ] Selects the channel.
[MODE] Changes the settings for SiriusXM
Satellite Radio reception on
the <SiriusXM Mode> screen.
(Pages 42–47)
Registers the current artist to the
[ ]
alert contents. (Page 43)
Registers the current song to the
[ ]
alert contents. (Page 43)
Activates/ deactivates the content
[ ]
alert for traffic and weather.
(Page 45)
40
[SEEK]
[SCAN]
]* 1 .
[S]/[T]/
[Live]
[ ]
].
* 1 The appearance of the buttons/indicators differs depending on the
model.
* 2 Appears only for KW-V330BT.
* 3
Appears only for KW-V430BT.
Presetting channels
❏ Storing channels in the memory
You can preset 5 channels for each band.
1
Tune in to a channel you want to preset.
(See the left column.)
2
Select a preset number.
The channel selected in step 1 is stored.
Changes the seek mode.
• SEEK1: Skip to another available
channel.
• SEEK2: Skip to another preset
channel.
Starts TuneScan™. (Page 43)
Used while replaying content.
(Page 42)
Changes the page of the operation
button window to display other
operation buttons.
(Hold)
❏ Selecting a preset channel
1
Select the band (1), then display the
preset channel window (2).
• You can also select a preset channel by
pressing [P1] – [P5].
2
Select a preset channel.
• Pressing [ < ] scrolls the text if not all of the
text is shown.
• To close the window list, press [
3
Select "SEEK2" as the seek mode to jump
to the selected preset channel.
].