JVC KW-V230BT Instruction Manual page 80

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
❏ Connecting wires to terminals for KW-V630BT
10 A fuse
See page 82.
See page 82.
See page 83.
1
White ª / White with black stripe · : To front/mid range speaker (left)*
Gray ª / Gray with black stripe · : To front/mid range speaker (right)*
Green ª / Green with black stripe · : To rear/tweeter speaker (left)*
Purple ª / Purple with black stripe · : To rear/tweeter speaker (right)*
Orange with white stripe (Dimmer control wire)
Light blue with yellow stripe (Steering remote control wire)
Blue with white stripe (Power control wire/Antenna control wire) (12 V
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
80
See page 82.
Connect the antenna cord
to the antenna terminal.
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
USB terminal (1.0 m): See page 81.
See page 82.
REAR VIEW CAMERA
See page 82.
VIDEO OUT
1
1
1
1
To car light control switch.
2
*
To the OE remote adapter (not supplied) which is compatible with your car.
To the power control terminal when using the optional power amplifier.
2
*
(Or)
350 mA)
To the control terminal of the motor antenna or to the power terminal for the booster
amplifier of film-type antenna.
Connect to the vehicle's reverse lamp harness
when using the optional rear view camera.
Connect to the vehicle's
3
parking brake detection
switch harness.
• For best safety, be
sure to connect the
parking sensor.
1
* For 3 way speaker system connection, see also page 83.
* 2
If no connections are made, do not let the cable come out
from the tab.
Ignition key switch
Fuse box
Battery
To car chassis