Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An External Device - Philips DCB188 User Manual

10 Other features

Set the alarm timer

‡
1
2
3
4
5
6
7
8
Activate and deactivate alarm timer
1
‡
‡
Downloaded From DvDPlayer-Manual.com Philips Manuals
Note
This player can set the Disc, Tuner, or iPod/
iPhone as the source for the alarm timer.
Make sure that you have set the clock
correctly.
In standby mode, press and hold TIMER.
Press DISC, TUN, or iPhone/iPod to
select a source.
Press TIMER WR FRQÀUP
» The hour digits are displayed and begin
to blink.
Press / to set the hour.
Press TIMER WR FRQÀUP
» The minute digits are displayed and
begin to blink.
Press / to set the minute.
Press TIMER WR FRQÀUP
» The timer is set and activated.
In the standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated, the display shows
.
» If timer is deactivated,
disappears.
Tip
Alarm timer is not available in MP3 LINK
mode.
If the DISC/iPod/iPhone source is selected but
no disc inserted or no iPod/iPhone connected,
the system will switch to the tuner source
automatically.

Set the sleep timer

This unit can switch to standby automatically
after a set of time.
1
When the unit is on, press SLEEP
repeatedly to select a set of time (in
minutes).
» When sleep timer is activated, the
display shows .
To deactivate sleep timer
1
Press SLEEP repeatedly until "off" is
displayed.
» When sleep timer is deactivated,
disappears.

Listen to an external device

You can also listen to an external audio device
through this unit.
1
Press AUX to select MP3 link source.
2
Connect the supplied MP3 link cable to:
‡ the MP3 LINK jack on this unit
‡ the headphone jack on the device
3
Start to play the device. (See the device
user manual)
EN 19