Universal Switch Control - HDL SB-Z-AUDIO User Manual

Some targets can be trigger when control the music player from LCD panel. From above
screen shot, when play SD Card music, it will turn on the lighting, when stop SD Card
music, it will turn off the lighting.
The buttons on the DLP panel have distinct functions when used to control music.

The first button when short pressed is used to select the SD-CARD, NAS-HDD,
RADIO, or AUDIO-IN. When long pressed it enters into the audio settings page
this is where the ZONE, SONG, TONE, PLAY LIST, PLAY MODE, and PARTY
mode can be selected.

The second button serves to control both play and pause.

The third and fourth buttons are able to select the previous playlist or the next
playlist.

The fifth and sixth buttons are able to select the previous song or the next song.

The seventh and eighth buttons are able to decrease or increase the volume.

5.8 Universal Switch Control

Universal switches can be used to control music, however three commands need to be
set to play one song.

First: Select music source

Second: Select a playlist

Third: Select a song in the playlist to play
Digital Background Music Player–User Manual
User Manual
SB-Z-AUDIO
21