Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for HDL SB-Z-AUDIO
- Page 1 User manual Digital Background Music Player SB-Z-AUDIO www.hdlautomation.com...
- Page 2 User Manual SB-Z-AUDIO Document updates: Version Date Description V1.0 2015.05.06 Finish new document Digital Background Music Player–User Manual...
-
Page 3: Table Of Contents
1.4Tips............................3 2. Safety Precautions........................3 3. Technical Data..........................4 4. Installation............................. 6 4.1 Wiring...........................6 4.2 HDL Bus Pro Description....................7 4.3 Commissioning........................7 5. Software Configuration....................... 8 5.1 Basic Information....................... 8 5.1.1 Changing the ID..................... 8 5.1.2 Changing the IP and IP MAC address............... 8 5.2 Music Settings........................8... -
Page 4: Overview
1.1.1 Description The SB-Z-AUDIO is a multi-functional audio system which supports multiple music sources. In combination with the i-Life app or a HDL DLP, the module can be fully controlled and integrated with security systems and SMS modules. 1.1.2 Mounting Screw fixing ... -
Page 5: Device Description
User Manual SB-Z-AUDIO 1.3 Device Description a. +24V、GND、-24V： Power Supply b.GND、DATA-、DATA+、DC24V：HDL Buspro c.SD CARD d. RJ45 e. Upgrade and Reset hold f. LED: Green LED will flicker when reset or when system is upgraded g. Working signal LED:Green LED will flicker when operational h.Left channel(with amplifier),Connect to 8Ω... -
Page 6: Tips
User Manual SB-Z-AUDIO 1.4Tips 1、LED flickers every 1.5swhenworking normally,the LED also flickers every0.1s when a playlist is being uploaded. 2、If the module cannot be found using the software, and the LED does not blink every 1.5 seconds, reset the IP. By default the module IP is 192.168.10.250, the IP of a connected PC should be set as 192.168.10..*... -
Page 7: Technical Data
<0.05% 97dB Frequency range 22Hz~20KHz ≤25 bytes File name length Music Format ≤8G SD card capacity Communication protocol HDL Buspro, FTP, UDP RJ45, SD card, HDL-BUS, RCA Audio, Audio output, DC Signal interface power input Digital Background Music Player–User Manual... - Page 8 User Manual SB-Z-AUDIO Environmental Conditions Working temperature 0℃~45℃ Working relative humidity Up to 90% Storage temperature -20℃~+60℃ Storage relative humidity Up to 93% Approved RoHS Production Information Dimensions 224×126×39 (mm) Weight 1266(g) Housing material Steel Installation Screw fix /DB Box installation...
-
Page 9: Installation
User Manual SB-Z-AUDIO 4. Installation 4.1 Wiring Digital Background Music Player–User Manual... -
Page 10: Hdl Bus Pro Description
Yellow 4.3 Commissioning Method One: a. Run the HDL-BUS Pro Setup tool. b. On the module long press the “programming button” for three seconds until the LED turns red. c. Using the software, click “Address management”, and then select “Modify address”, the window below will then be displayed. -
Page 11: Software Configuration
5.1.1 Changing the ID It’s recommended to connect it via RJ45 and set the subnet ID difference from the Gateway (typically the SB-DN-1IP or HDL-MBUS01IP.431). 5.1.2 Changing the IP and IP MAC address It is recommended that the default IP and the IP MAC address are changed, to avoid possible conflicts or errors. -
Page 12: Accessing The Sd Card
5.2.2 Selecting a playlist from the SD card Using the HDL BUS Pro setup tool, click on the ‘Playlist in SD Card’ tab. When a playlist is selected, its content will be displayed on the right hand side of the screen. If a song is selected then it can be played, stopped, and the volume adjusted using the controls on the bottom of the panel. -
Page 13: Function Selection And Radio Settings
User Manual SB-Z-AUDIO 5.3 Function selection and radio settings 5.3.1 Functions The following audio sources can be played and controlled from the DLP and i-Life interface. SD card FTP Server FM radio External audio input. Digital Background Music Player–User Manual... -
Page 14: 2Fm Channel List
The ‘Broadcast’ function or ‘party mode’ as it is alternatively known, enables multiple Z-Audio modules to play the same songs simultaneously. If the HDL-BUS setup tool is opened, one Z-Audio module can be set as the master module causing the remaining Z-Audio modules to be relegated to slave modules. If a DLP panel then activates the ‘party mode’(the party mode can be enabled or disabled by... - Page 15 User Manual SB-Z-AUDIO a) Create a folder named ‘PA_**’ in the SD card Create a folder named ‘PA_**’ (The ‘**’can be a single character or multiple characters) in the SD card, place your chosen songs into the folder and then insert the SD Card into the master Z-Audio module.
- Page 16 User Manual SB-Z-AUDIO b) Configuring a Z-Audio module as a master module Take the above Z-Audio as a master module. Broadcast mode - Host: act as the master Z-Audio, to synchronize its audio stream to other slave ones; - Slave: act as the slave Z-Audio, to play the same audio which received from the host;...
- Page 17 User Manual SB-Z-AUDIO c) Configuring the Z-Audio slave modules Take below Z-Audio module as a slave module. To then enable the module to receive commands from the master, the ‘slave’ mode must be selected, and if the ‘volume synchronization’ tick box is checked, then it can synchronize the volume of the master one.
-
Page 18: Language Synthesis
SD card slot. It is recommended that to select corresponding server type and file encode parameters according to different FTP servers. These parameters should be set in the HDL Bus setup tool. Server Name Server Type... -
Page 19: 2Playing Music From A Pc
User Manual SB-Z-AUDIO Server IP: set the IP address of server, PC or NAS. Server type: select the server type according to the FTP server you used User name: input the user name of your account which created in FTP server ... - Page 20 User Manual SB-Z-AUDIO b) Set your user name and password, in the example below the user name is TEST, and the password is 123456. c) To access the music folders, click on the ‘Browse’ tab. A file explorer window will then appear, selecting the ‘Music’...
- Page 21 User Manual SB-Z-AUDIO d) After setting the home directory, a user should click on the ‘Apply’ tab, this will then exit the ‘Ftp Client Editor’ interface, and return to the main interface. The newly created account and its home directory will now be displayed. To start the server click on the ‘Start Server’...
-
Page 22: Setting A Button Target
User Manual SB-Z-AUDIO To refresh the playlists, open the ‘Playing Music Setting’ page, and turn to the ‘Playlist in SD Card’ tab, click the FTP icon to refresh. When the program finishes updating the playlists, ‘Success in updating’ will be displayed on the bottom of the window. The Z-AUDIO module can now play music from a PC. -
Page 23: Lcd Panel Control
User Manual SB-Z-AUDIO song. 5.7 LCD Panel Control To enable LCD panel control, a user should follow the below steps: Open the LCD panel’s Music page Enable the Music page status Select ‘Z-Audio’ for the Audio mode. -
Page 24: Universal Switch Control
User Manual SB-Z-AUDIO Some targets can be trigger when control the music player from LCD panel. From above screen shot, when play SD Card music, it will turn on the lighting, when stop SD Card music, it will turn off the lighting. - Page 25 User Manual SB-Z-AUDIO UV Switch list for Z-AUDIO: UV Switch No. Function ON: Select a song in playlist(song No.1-149) 1-149 OFF: select a song to stop ON: Select a playlist(playlist No.0-50) 150-200 OFF: Do nothing ON: Play OFF: Stop ON: Stop All...
- Page 26 User Manual SB-Z-AUDIO Voice 20 Voice 15 Voice 10 Voice 5 Voice 0(Max) Play One Repeat One Order Play Repeat All Common rules when using the universal switch To enable voice playback: 1：Send universal switch 208, ON (Select Audio source) 2：Send universal switch 150, ON (Select List)
- Page 27 User Manual SB-Z-AUDIO To play an audio file from a FTP source: 1：Send universal switch 209, ON (Select Audio source) 2：Send universal switch 151～200，ON (Select 1～50 play list) 3：Send universal switch 1～149, ON (Select a song to Play) To stop playing an audio file from a FTP source: 1：Send universal switch 209, ON (Select Audio source)
-
Page 28: Note
User Manual SB-Z-AUDIO 6. Note ………………………………………………………………………………………………………. ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… ……………………………………………………………………………………………………… Digital Background Music Player–User Manual...