HDL SB-Z-AUDIO User Manual page 17

User Manual
SB-Z-AUDIO
c) Configuring the Z-Audio slave modules
Take below Z-Audio module as a slave module.
To then enable the module to receive commands from the master, the 'slave' mode must
be selected, and if the 'volume synchronization' tick box is checked, then it can
synchronize the volume of the master one.
Four groups are available, and all act as slave ones under slave mode. Set anyone group
e.g. Group1 the same number as the host one's first group number(here it's 1), it can then
synchronize with the host/master modules music library.
d) Setting the master Z-Audio module as the music control target
To set the master Z-Audio module as the music control target, the subnet ID and the
device ID must be entered.
Digital Background Music Player–User Manual 14