Aux-In; Alarm Clock - VQ RETRO MKII Operation Manual

GB
Retro Mk II Operation Guide

AUX-IN

MODE
1. If the display shows the clock, press
2. To connect the auxiliary device: plug the aux-in cable into the 3.5mm AUX-IN jack at the back of
the radio.
3.
To switch to AUX-IN press MODE repeatedly button until the display briefly shows 'Auxiliary Input' .
4.
To control the playback of the auxiliary device you need to use the device's own controls. You may need
to adjust volume on your Retro Mk II and the auxiliary device for optimum volume and clarity.

Alarm Clock

Your Retro Mk II has dual alarms, which can operate in both working and standby mode. You can wake up to
DAB/DAB+, FM, iPod or two different beep tones.
To set an Alarm
MODE MENU
1. In working modes press to select Alarm 1 Setup. Press it again to select Alarm 2 Setup.
2. Press to set the alarm time. The top line of the display shows the alarm number, and the currently
selected alarm source. The default setting is BUZZER. The second line of the display shows flashing
MODE alarm status, and the time the alarm is set. MODE MENU MENU
3. Press or to select Alarm "On" Hour.
MODE MENU
4. Once the Hour is set, press again to select Minute. Press
MODE MENU
5. Press again to select Duration of Alarm. Press
60 min or 90 min.
MODE MENU
6. Press again to select Alarm Source. Press
MODE MODE MENU
Note : For DAB & FM, press or to select the last listened channel or a specific
channel.
MODE MENU
7. Press again to select alarm interval of "Daily", "Once", Weekends" or "Weekdays".
MODE MODE MENU
MODE MENU
8. Press then press or to select the volume of alarm.
MODE MODE MENU
MENU
MODE MENU
9. Press then press or to select Alarm On / Off. Display shows "Alarm Saved" and the alarm
symbol lights up on the display.
28
MENU
to switch to working mode.
MODE MODE MENU MENU
or to select "On" Minute.
MODE MODE MENU MENU
or to select 15 min, 30 min, 45 min ,
MODE MODE MENU MENU
or to select Buzzer, DAB, FM or iPod.
MENU
MENU
MENU
10. Repeat above steps for Alarm 2 setting.
11.
In Standby mode your Retro MK II will show bell symbols and numbers to show which alarms are active.
MODE
MODE MENU
12.
In Standby mode, press
Press repeatly to cycle through 4 states :
Alarm 1 : Off
Alarm 2 : Off
Alarm 1 : On
Alarm 2 : Off
Alarm 1 : Off
Alarm 2 : On
Alarm 1 : On
Alarm 2 : On
MODE MODE
Press or to select On /Off and then press
Stopping or snoozing the alarm
MODE
When alarm goes on you can press
minutes. Your Retro MK II will enter into Standby mode and show the clock.
You can repeat snoozing for a maximum period of 1 hour.
Snoozing multiple alarms
Only one alarm can be snoozing at a time. If ALARM 1 is snoozing ALARM 2 will also automatically snooze if
it begins to sound.
Retro Mk II Operation Guide
MENU
to show alarm status or to change Alarm On /Off settings.
MENU MENU
MODE MENU
to confirm changes on alarm settings.
MENU
to turn off the alarmto snooze, press any buttons to snooze for 9
GB
29