To Convert Weight Units; "Zero" Or 'Tare" Function - Zephir ZHS433N Instruction Manual

"ZERO" or 'TARE" function

To weigh different loads consecutively without removing loads from the scale.
Put first load on the scale, get weight reading. Press Z/T button to reset
the LCD reading to '0' before adding next load.

TO CONVERT WEIGHT UNITS

If the scale is with both measuring system of
Metric (kilograms,grams) and Imperial (pounds,
ounces), you can press UNIT to convert between
two systems during the course of weighing.
Condition 1: When total sum of all loads
on scale ≤ 4% of scale's max capacity.
(4%=80g when capacity is 2kg;
200g when capacity is 5kg)
LCD will show '0g' each time Z/T is pressed.
Icon '0' will show on left lower corner o f LCD,
indicating 'ZERO' function is active.
Max.weight capacity remains unchanged.
Condition 2: When total sum of all loads
on scale > 4% of scale's max capacity.
(4%=80g when capacity is 2kg;
200g when capacity is 5kg)
LCD will show '0g' each time Z/T is pressed.
Icon 'TARE' will show on left upper corner of
LCD, indicating 'TARE' function is active .
Max.weight capacity is reduced by total weight
of all loads.
Under this condition:
By pressing Z/T, you can see the total weight
of all loads on the scale. If you want to weigh
more lo ads, just press Z/T to re set LCD
reading to '0' again.
5