Table of Contents
Advertisement
Enter the number.
5
Press
Press
to return to
6
standby.
9.4.3 Dial a baby call number
When a baby call number
1
has been stored and the
baby call setting switched
on, press any key (except
) on the keypad to dial
the number.
Note
When baby call is switched
on, you can still answer any
incoming call as normal.
9.5 Registration
Up to 5 handsets can be
registered to one base station.
Additional handsets must be
registered to the base before
you can use them.
Notes
• The instructions described
below apply specifi cally to
your Philips SE245 handset.
36
to confi rm.
If you wish to register
another manufacturer's
handset, the instructions may
vary. In this case, please refer
to the manufacturer of the
additional handset.
• The Master PIN is required
before you can register or
unregister handsets. The
default PIN is 0000.
9.5.1 Register a handset
At the base, press and hold
1
for about 3 seconds.
The base station emits a beep
when it is ready to accept
registration.
Note
The base is able to accept
registration from a handset
within 90 seconds. If
is pressed, registration is
cancelled.
At the handset, press
2
and scroll
ADVANCED SET
.
Scroll
3
REGISTRATION
.
to
and press
to
and press
Advanced settings
Advertisement
Table of Contents
