Table of Contents
Advertisement
Heater control errors
Heater control errors are the errors which
generate the switch off of one or more
heaters.
When a heater error is detected, the involved
heaters are switched off, a beep sounds
(only if one or more heaters are active) and
the displays corresponding to these heaters
show an 'F' letter and the error code
alternately.
While in error status the keys of the
corresponding heaters are not operative.
All errors are recoverable. That is, when the
cause
of
the
corresponding displays are deactivated and
the heaters return to normal operation.
Problem check
Before calling a service technician to assist with a problem:
PROBLEM
The plates do not work
Remember that you may be charged for a service call even during the warranty period if the fault is
due to or caused by the above.
Page 26
error
disappears
the
SOLUTION
Check there is power to the wall switch.
Advertisement
Table of Contents
