Philips MG1100 Directions For Use Manual page 7

Trimming with the precision trimming head
With the precision trimming head without trimming comb, you can trim
hairs to a length of 1mm, the so-called 'stubble look'.
1 Put the precision trimming head on the appliance (see section
'Attaching and detaching the attachments' in chapter 'Preparing
for use').
2 Switch on the appliance.
3 Touch the hairs lightly with the precision trimming head and move it
against the direction of hair growth.
Note: You can use the precision trimming head with the trimmer teeth pointing
towards the skin. You can also use it with the flat part touching the skin and
the teeth pointing in the direction in which you move the appliance.
4 Switch off the appliance.
Trimming with precision trimming head with precision
trimming comb
1 Put the precision trimming head on the appliance (see section
'Attaching and detaching the attachments' in chapter 'Preparing for use').
2 Choose the short, medium or long trimming comb, depending on the
desired hair length. The indications 'S', 'M' and 'L' are on the combs.
- Short trimming comb (S): 1mm
- Medium trimming comb (M): 3mm
- Long trimming comb (L): 5mm
Tip: We advise you to start trimming with the long comb.
ENGLISH
7