Appliqué Embroidery 6; Cutwork Embroidery - Pfaff creative 2170 Owner's Manual

Appliqué embroidery
All appliqué embroideries are marked with an A in Pfaff creative
cards/cds design booklets.
To embroider an appliqué design, place a stabilizer underneath the
fabric and hoop all the layers. Start to embroider. A straight stitch
outline is stitched around the appliqué design. When the machine
stops, place the appliqué fabric on top.
Start your machine again, and the machine will sew a straight stitch
outline around the appliqué section of the design. When the machine
stops the second time, slide off the hoop but do not take the fabric out
of the hoop. Carefully trim around only the appliqué fabric outside the
straight stitch line.
Slide the hoop back onto the embroidery unit and continue
embroidering to fi nish the appliqué edges and the entire embroidery.

Cutwork embroidery

All cutwork embroideries are marked with an A in Pfaff creative
cards/cds design booklets.
To embroider cutwork designs, place a stabilizer underneath the fabric
and hoop all layers. Start embroidering. A straight stitch outline is
stitched around the cutwork design. When the machine stops, remove
the hoop but do not take the fabric out of the hoop. Carefully cut away
the fabric from inside the straight stitch outline making sure you do
not cut away the stabilizer. To fi nish, slide the hoop back onto the
embroidery unit and continue embroidering.
5:47